Toyotomi etk-s50dx Owner's Manual

PREPARATION BEFORE USE

HOW TO INSTALL THE FILTERS

(Be sure to assemble Filters before using the Air Purifier.)

Pull the front panel toward you and remove it while

pressing the right and left buttons at the bottom of the

main unit.

Remove the Prefilter.

Remove the

HEPA Type

filter and activated carbon

filter in the bag from the main unit.

Take the HEPA Type filter and activated carbon filter

out of the bag and put the thinner activated carbon

filter behind the HEPA Type filter, then mount the

HEPA Type filter to the main unit according to the

mounting direction

with the green-cloth side to the

front. Mount the Prefilter, too.

Align the nails located at the top of the front panel to

the main unit, and hang the front panel onto the right

and left hooks at the lower part.

★If the HEPA Type filter and activated carbon filter are mounted incorrectly, the filters will not

work properly. Make sure that the green-cloth side of the HEPA Type filter is in front.

★Dirty HEPA Type filters and activated carbon filters cannot be reused even if they are

washed. Be sure to replace them.

★The HEPA Type filter should be replaced about five years after opening the package. The

activated carbon filter should be replaced about two years after opening the package. The

replacement frequency depends on how long they are used or where they are installed.

¡The lifetime of the filters will become very short in cases where they absorb oily smoke or

carbonized substances such as soot.

NOTE

Button

Prefilter

Hook

English

eed

ard

ed,