Инструкции Пользователя для Toyotomi etk-s50dx
9
PREPARATION BEFORE USE
1
HOW TO INSTALL THE FILTERS
(Be sure to assemble Filters before using the Air Purifier.)
1
1
Pull the front panel toward you and remove it while
pressing the right and left buttons at the bottom of the
main unit.
2
2
Remove the Prefilter.
3
3
Remove the
HEPA Type
filter and activated carbon
filter in the bag from the main unit.
4
4
Take the HEPA Type filter and activated carbon filter
out of the bag and put the thinner activated carbon
filter behind the HEPA Type filter, then mount the
HEPA Type filter to the main unit according to the
mounting direction
with the green-cloth side to the
front. Mount the Prefilter, too.
5
5
Align the nails located at the top of the front panel to
the main unit, and hang the front panel onto the right
and left hooks at the lower part.
★If the HEPA Type filter and activated carbon filter are mounted incorrectly, the filters will not
work properly. Make sure that the green-cloth side of the HEPA Type filter is in front.
★Dirty HEPA Type filters and activated carbon filters cannot be reused even if they are
washed. Be sure to replace them.
★The HEPA Type filter should be replaced about five years after opening the package. The
activated carbon filter should be replaced about two years after opening the package. The
replacement frequency depends on how long they are used or where they are installed.
¡The lifetime of the filters will become very short in cases where they absorb oily smoke or
carbonized substances such as soot.
NOTE
Button
Prefilter
Hook
English
N
rt
me
n.
es
eed
ard
et
or
p
ed,
ts
n)
d,
nd
ts