Champion pp-3 User Manual
M A I N T E N A N C E
¾ Remove the old controller and install the new one.
¾ Install the five retainers “C”.
¾ Connect the three plugs “B”.
¾ Connect the four Plugs “A”
¾ Close the hinged panel and replace the two fasteners.
¾ Turn on Power.
Replacing Pump
¾ Turn off and lockout the incoming
power to the control panel.
¾ Disconnect the electrical plug by
removing the retainer and pulling out
the plug.
the plug.
Plug
¾ Loosen the three hose clamps and
remove the three hoses “A”.
¾ Remove the four bolts
from base of pump “B"
¾ Replace pump with
new pump.
¾ Install the four bolts at
base of pump “B”.
¾ Reconnect and tighten
the three hoses “A”.
¾ Reconnect the electrical
plug.
A
¾ Turn power back on.
56