Sony STR-DA3100ES Operating Guide
masterpage:Left
lename[E:\SEM_Janet\Revision
Data\J9050000_2514877131STRDA3100ESU\2514877131\GB070TH_STR-DA3100ES-U.fm]
model name1[STR-DA3100ES]
[2-514-877-13(1)]
50
US
This function is useful when you use 2 Sony
receivers in the same room.
receivers in the same room.
1
Turn off the receiver.
2
Hold down INPUT MODE and press ?/1
to turn on the receiver.
to turn on the receiver.
“COMMAND MODE [AVX]” appears in
the display. Each time you repeat the
procedure above, the display changes as
follows:
COMMAND MODE [AV1]
the display. Each time you repeat the
procedure above, the display changes as
follows:
COMMAND MODE [AV1]
y
COMMAND MODE [AV2]
Tip
The initial setting is “COMMAND MODE [AV2]”.
Notes
• The initial setting for the command mode of the
supplied remote is “AV2”.
• If the command mode of the receiver and the remote
is different, you cannot use the remote to operate the
receiver.
receiver.
You can set the receiver to turn off automatically
at a specified time by using the remote.
at a specified time by using the remote.
Press ALT, then press SLEEP repeatedly
while the power is on.
while the power is on.
Each time you select or press SLEEP, the
display changes cyclically as follows:
2:00:00
display changes cyclically as follows:
2:00:00
t 1:30:00 t 1:00:00 t 0:30:00 t
OFF
While using Sleep Timer, “SLEEP” lights up in
the display.
While using Sleep Timer, “SLEEP” lights up in
the display.
Tip
To check the remaining time before the receiver turns
off, press ALT, then press SLEEP. The remaining time
appears in the display.
off, press ALT, then press SLEEP. The remaining time
appears in the display.
Changing the command
mode of the receiver
mode of the receiver
Using the Sleep Timer
GB01COV_STR-DA3100ES-U.book Page 50 Wednesday, July 13, 2005 2:23 PM