Sony STR-DA3100ES Operating Guide

Page of 80
masterpage:Left
lename[E:\SEM_Janet\Revision 
Data\J9050000_2514877131STRDA3100ESU\2514877131\GB070TH_STR-DA3100ES-U.fm]
 model name1[STR-DA3100ES]
 [2-514-877-13(1)]
52
US
Recording on a video tape
You can record from a VCR, a TV, or an LD 
player using the receiver. You can also add 
audio from a variety of audio sources when 
editing a video tape. See the operating 
instructions of your VCR if you need help.
1
Select the program source to be 
recorded.
2
Prepare the component for playing.
For example, insert the laser disc you want 
to record into the LD player.
3
Insert a blank video tape into the VCR 
(VIDEO 1 or VIDEO 2) for recording.
4
Start recording on the recording VCR, 
then start playing the video tape or 
laser disc you want to record.
Notes
• You cannot record a digital audio signal using a 
component connected to the analog VIDEO 1 OUT 
or VIDEO 2 OUT jacks. 
• Make sure to make both digital and analog 
connections to the TV/SAT or DVD inputs. Analog 
recording is not possible if you make only digital 
connections.
• Some sources contain copy guards to prevent 
recording. In this case, you may not be able to record 
from the sources.
• The analog audio signals of the current input are 
output from the VIDEO 1 OUT or VIDEO 2 OUT 
jacks.
• The signals input to the MULTI CH IN jacks are not 
output from VIDEO 1 OUT or VIDEO 2 OUT jacks 
even when MULTI CH IN is being used. The analog 
audio signals of the current or previously used input 
are output.
GB01COV_STR-DA3100ES-U.book  Page 52  Wednesday, July 13, 2005  2:23 PM