Sony STR-DE898 Manual
Op
era
tio
ns
Us
Us
in
g
the
Re
mote
RM-AAL
00
1
1
masterpage:Right
lename[D:\Sony
SEM\Data_DE898_Revision3\J9050152_2580791113DE898U\2580791113\GB08REM_STR-
DE898-U.fm]
DE898-U.fm]
49
GB
model name1[STR-DE898]
[2-580-791-11(3)]
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component the above operation may not be possible
or may operate differently than described.
component the above operation may not be possible
or may operate differently than described.
• To activate the buttons with orange printing, press
ALT first before pressing the buttons.
• When you press input buttons (VIDEO1, VIDEO2,
VIDEO3, TV/SAT or DVD), the input mode of the
TV might not switch to the corresponding input
mode that you want. In this case, press TV/VIDEO
button to switch the input mode of the TV.
TV might not switch to the corresponding input
mode that you want. In this case, press TV/VIDEO
button to switch the input mode of the TV.
Set the remote command mode using the RM
SET UP button and the remote command mode
buttons.
SET UP button and the remote command mode
buttons.
Selecting the command mode
You can switch the command mode (AV1 and
AV2) of the remote. If the command mode of the
receiver and the remote is different, you cannot
use the remote to operate the receiver.
AV2) of the remote. If the command mode of the
receiver and the remote is different, you cannot
use the remote to operate the receiver.
Press AV1 or AV2 while holding down RM
SET UP.
SET UP.
The indicator flashes once (twice for AV2) ,
then the command mode switches.
then the command mode switches.
To check the command mode of
the remote
the remote
Press RM SET UP. You can check the remote by
the indicator.
the indicator.
To reset the remote to factory
settings
settings
Press
?/1
, AV
?/1
and MASTER VOL – at
the same time.
The indicator flashes 3 times, then goes off.
Note
If the command mode of the receiver and the remote is
different, you cannot use the remote to operate the
receiver. To change the command mode of the
receiver, see page 59.
different, you cannot use the remote to operate the
receiver. To change the command mode of the
receiver, see page 59.
Remote
Button
Button
Operations
Function
x qd
VCR/
CD player/
VCD player/
LD player/
DVD player/
MD deck/
DAT deck/
Tape deck/
Blu-ray disc
recorder/
Hard disc
recorder/PSX
CD player/
VCD player/
LD player/
DVD player/
MD deck/
DAT deck/
Tape deck/
Blu-ray disc
recorder/
Hard disc
recorder/PSX
Stops playback.
O ws
VCD player/
LD player/
DVD player/
Satellite tuner/
Blu-ray disc
recorder/
Hard disc
recorder/PSX
LD player/
DVD player/
Satellite tuner/
Blu-ray disc
recorder/
Hard disc
recorder/PSX
Returns to the previous
menu or exits the menu.
menu or exits the menu.
V/v ws
Receiver
Selects a menu item.
B/b ws
Receiver
Adjusts or changes the
setting.
setting.
V/v/B/b
ws
ws
VCR/
Satellite tuner/
DVD player
Satellite tuner/
DVD player
Selects a menu item.
-/-- wg
TV/
Satellite tuner/
Blu-ray disc
recorder/
Hard disc
recorder/PSX
Satellite tuner/
Blu-ray disc
recorder/
Hard disc
recorder/PSX
Selects the channel
entry mode, either one
or two digit.
entry mode, either one
or two digit.
2ND 3
Remote
Selects the command
mode of the remote.
mode of the remote.
Selecting the command
mode of the remote
mode of the remote
Mode
Indicator flashes
AV1
once
AV2
twice
GB01COV_STR-DE898-U.book Page 49 Tuesday, March 15, 2005 12:20 PM