Sony str-dg510 User Manual

 

 

 

 

 

 

 

Irregular current is output from the 
speakers. The receiver will automatically 
turn off after a few seconds. Check the 
speaker connection and turn on the power 
again.

Clearing the receiver’s memory may remedy 
the problem (page 26). However, note that all 
memorized settings will be reset to their 
factory settings and you will have to readjust 
all settings on the receiver.

Consult your nearest Sony dealer. Note that if 
service personnel changes some parts during 
repair, these parts may be retained.

 

(Models of area code U only)
With 8 ohm loads, both channels driven, from 
20 – 20,000 Hz; rated 90 watts per channel 
minimum RMS power, with no more than 
0.09% total harmonic distortion from 250 
milliwatts to rated output.

Models of area code U, CA

1)

Minimum RMS Output Power (8 ohms, 20 Hz – 
20 kHz, THD 0.09%) 

90 W + 90 W

Stereo Mode Output Power (8 ohms, 1 kHz, 

 

THD 1%) 

100 W + 100 W

Surround Mode Output Power

2)

 (8 ohms, 1 kHz, 

THD 10%)

130 W/ch

Models of area code CEL, CEK, AU, TW

1)

Minimum RMS Output Power (8 ohms, 20 Hz – 
20 kHz, THD 0.09%) 

85 W + 85 W

Stereo Mode Output Power

 

(8 ohms, 1 kHz,

 

THD 1%) 

100 W + 100 W

Surround Mode Output Power

2)

 (8 ohms, 1 kHz, 

 

THD 10%)

130 W/ch

Models of area code SP, E2

1)

Minimum RMS Output Power (8 ohms, 20 Hz – 
20 kHz, THD 0.09%) 

70 W + 70 W

Stereo Mode Output Power (8 ohms, 1 kHz, 

 

THD 1%) 

80 W + 80 W

Surround Mode Output Power

2)

 (8 ohms, 1 kHz, 

 

THD 10%)

120 W/ch

All memorized settings

Customized sound fields