Sony STR-DG910 User Guide

US

D:\CANNES\SONY_HA\JOB 2007\STR-DG910\IM_910_US\STR-DG910_data\GB03CON_STR-
DG910-UC.fm

STR-DG910

3-094-430-11 (1)

Connect the AC power cord to a wall outlet.

• The AC OUTLET(s) on the rear of the receiver is a 

switched outlet, which supplies power to the 
connected component only while the receiver is 
turned on.

• Make sure that the total power consumption of the 

component(s) connected to the receiver’s AC 
OUTLET(s) does not exceed the wattage stated on 
the rear panel. Do not connect high-wattage 
electrical home appliances such as electric irons, 
fans, or TVs to this outlet. This may cause a 
malfunction.

Before using the receiver for the first time, 
initialize the receiver by performing the 
following procedure. This procedure can also 
be used to return settings you have made to 
their factory defaults. 
Be sure to use the buttons on the receiver for 
this operation.

Press ?/1 to turn off the 
receiver.

Hold down ?/1 for 5 seconds.

“PUSH” and “ENTER” appears on the 
display alternately.

After “CLEARING” appears on the 
display for a while, “CLEARED” 
appears.
The following items are reset to their 
factory settings.
• All settings in the LEVEL, EQ, SUR, 

TUNER, AUDIO, VIDEO, SYSTEM 
and A. CAL menus.

• The sound field memorized for each 

input and preset station.

• All sound field parameters.
• All preset stations.
• All index names for inputs and preset 

stations.

• MASTER VOLUME is set to “VOL 

MIN”.

• Input is set to “DVD”.

AC power cord 

To the wall outlet

AC OUTLET

?/1