Sony STR-DG910 User Guide
78
US
D:\CANNES\SONY_HA\JOB 2007\STR-DG910\IM_910_US\STR-DG910_data\GB06OTH_STR-
DG910-UC.fm
DG910-UC.fm
masterpage: Left
STR-DG910
3-094-430-11 (1)
Switching between
digital and analog audio
digital and analog audio
(INPUT MODE)
You can select the audio input mode setting
when you connect components to both digital
and analog audio input jacks on the receiver.
when you connect components to both digital
and analog audio input jacks on the receiver.
1
Turn INPUT SELECTOR on the
receiver to select the input.
receiver to select the input.
You can also use the input buttons on the
remote.
remote.
2
Press INPUT MODE repeatedly
on the receiver to select the
audio input mode.
on the receiver to select the
audio input mode.
The selected audio input mode appears on
the display.
the display.
Audio input modes
x AUTO IN
Gives priority to digital audio signals when
there are both digital and analog connections.
If there are no digital audio signals, analog
audio signals are selected.
there are both digital and analog connections.
If there are no digital audio signals, analog
audio signals are selected.
x HDMI IN
Specifies the audio signals input to the HDMI
jack.
jack.
x COAX IN
Specifies the digital audio signals input to the
DIGITAL COAXIAL jack.
DIGITAL COAXIAL jack.
x OPT IN
Specifies the digital audio signals input to the
DIGITAL OPTICAL jack.
DIGITAL OPTICAL jack.
x ANALOG
Specifies the analog audio signals input to the
AUDIO IN (L/R) jacks.
AUDIO IN (L/R) jacks.
Notes
• Some audio input modes may not be set up
depending on the input.
• When the ANALOG DIRECT function is selected,
audio input is set to “ANALOG” automatically and
you cannot select other modes.
you cannot select other modes.
Other Operations