Sony STR-DG910 Supplementary Manual
7
GB
Troubleshooting
If you experience any of the following
difficulties while using the HDMI CONTROL
function, use this troubleshooting guide to
help you remedy the problem.
difficulties while using the HDMI CONTROL
function, use this troubleshooting guide to
help you remedy the problem.
The HDMI CONTROL function does not
work.
work.
• Check the HDMI connection (page 3).
• Make sure “CONTROL” is set to “CTRL
• Make sure “CONTROL” is set to “CTRL
ON” in VIDEO menu.
• Make sure the connected component is
compatible with the HDMI CONTROL
function.
function.
• Check the HDMI CONTROL settings on
the connected component. See the
operating instructions of the connected
component.
operating instructions of the connected
component.
• If you change the HDMI connection,
connect/disconnect the AC power cord, or
there is a power failure, repeat the
procedures of “Preparing for HDMI
CONTROL function” (page 4).
there is a power failure, repeat the
procedures of “Preparing for HDMI
CONTROL function” (page 4).
No sound is output from the receiver
and TV speaker while using the System
Audio Control function.
and TV speaker while using the System
Audio Control function.
• Make sure the TV is compatible with the
System Audio Control function.
• If the TV does not have System Audio
Control function, set the “AUDIO”
settings in VIDEO menu to
– “TV+AMP” if you want to listen to the
settings in VIDEO menu to
– “TV+AMP” if you want to listen to the
sound from the TV speaker and
receiver.
receiver.
– “AMP” if you want to listen to the
sound from the receiver.