Sony DCR-PC1000 Manual

DCR-PC1000 2-591-678-11(1)

after using a cleaning cassette, it might be 
because the video head is worn. Please contact 
your Sony dealer or local authorized Sony 
service facility to have the video head replaced.

•  Do not exert excessive pressure on the LCD 

screen, as it may cause damage.

•  If your camcorder is used in a cold place, a 

residual image may appear on the LCD screen. 
This is not a malfunction.

•  While using your camcorder, the back of 

the LCD screen may heat up. This is not a 
malfunction.



If fingerprints or dust make the LCD screen 
dirty, it is recommended you use a soft 
cloth to clean it. When you use the LCD 
Cleaning Kit (optional), do not apply the 
cleaning liquid directly to the LCD screen. 
Use cleaning paper moistened with the 
liquid.



The buttons on the touch panel may not 
work correctly. If this happens, follow the 
procedure below. It is recommended you 
connect your camcorder or the Handycam 
Station to the wall outlet using the supplied 
AC Adaptor during the operation.

 Slide the POWER switch down to turn on 

the PLAY/EDIT lamp.

 Disconnect cables other than that of the 

AC Adaptor from your camcorder or the 
Handycam Station, then eject the cassette 
and “Memory Stick Duo” from your 
camcorder.

 Touch 

 

 [MENU]  

 

(STANDARD SET) 

 [CALIBRATION] 

 

.

•

  The screen changes to 16:9 ratio when 

using 4:3 ratio.

CALIBRATION

Touch the "x"

1/3

CANCEL

 Touch the “×” displayed on the screen with 

the corner of the supplied “Memory Stick 
Duo.” 
Touch [CANCEL] to cancel.

The position of the “×” changes. If you did 
not press the right spot, start from step 



 

again.

•  You cannot calibrate the LCD screen if it is 

rotated.

•  If the casing is soiled, clean the camcorder body 

with a soft cloth lightly moistened with water, 
and then wipe the casing with a dry soft cloth.

•  Avoid the following to avoid damage to the 

finish.
–  Using chemicals such as thinner, benzine, 

alcohol, chemical cloths, repellent and 
insecticide.

–  Handling with above substances on your 

hands.

–  Leaving the casing in contact with rubber or 

vinyl objects for a long period of time.

•  Wipe the surface of the lens clean with a soft 

cloth in the following instances:
–  When there are fingerprints on the lens 

surface.

–  In hot or humid locations
–  When the lens is exposed to salty air such as 

at the seaside.

•  Store in a well-ventilated location subject to 

little dirt or dust.

•  To prevent mold, periodically clean the lens as 

described above. It is recommended that you 
operate your camcorder about once a month to 
keep it in optimum state for a long time.

Your camcorder has a pre-installed 
rechargeable battery to retain the date, 
time, and other settings even when the 
POWER switch is set to (CHG) OFF. The 
pre-installed rechargeable battery is always 
charged while your camcorder is connected 
to the wall outlet via the AC Adaptor 
or while the battery pack is inserted. 

Maintenance and precautions (Continued)