Draytek g2080 User Manual
VigorSwitch G2080 User’s Guide
59
2
2
.
.
1
1
1
1
V
V
L
L
A
A
N
N
The switch supports Tag-based VLAN (802.1q) and Port-based VLAN
.
Support 256 active
VLANs and VLAN ID 1~4094. VLAN configuration is used to partition your LAN into small ones
as your demand. Properly configuring it, you can gain not only improving security and increasing
performance but greatly reducing VLAN management.
as your demand. Properly configuring it, you can gain not only improving security and increasing
performance but greatly reducing VLAN management.
2
2
.
.
1
1
1
1
.
.
1
1
V
V
L
L
A
A
N
N
M
M
o
o
d
d
e
e
Function name:
VLAN Mode Setting
Function description:
The VLAN Mode Selection function includes five modes: Port-based, Tag- based, Metro
Mode, Double-tag and Disable, you can choose one of them by pulling down list and
selecting an item. Then, click <Apply> button, the settings will take effect immediately.
Mode, Double-tag and Disable, you can choose one of them by pulling down list and
selecting an item. Then, click <Apply> button, the settings will take effect immediately.
Parameter description:
VLAN Mode:
Disable -
Stop VLAN function on the switch. In this mode, no VLAN
is applied to the switch. This is the default setting.
Port-based -
Port-based VLAN is defined by port. Any packet coming in
or outgoing from any one port of a port-based VLAN will be
accepted. No filtering criterion applies in port-based VLAN.
The only criterion is the physical port you connect to. For
example, for a port-based VLAN named PVLAN-1 contains
port members Port 1&2&3&4. If you are on the port 1, you
can communicate with port 2&3&4. If you are on the port 5,
Stop VLAN function on the switch. In this mode, no VLAN
is applied to the switch. This is the default setting.
Port-based -
Port-based VLAN is defined by port. Any packet coming in
or outgoing from any one port of a port-based VLAN will be
accepted. No filtering criterion applies in port-based VLAN.
The only criterion is the physical port you connect to. For
example, for a port-based VLAN named PVLAN-1 contains
port members Port 1&2&3&4. If you are on the port 1, you
can communicate with port 2&3&4. If you are on the port 5,