Edirol LVS-400 Supplementary Manual
12
About the New Functions
Using the Chroma-Key function, you can change the color that is replaced in the image.
1
Connect a monitor display to the MONITOR OUT connector.
2
Prepare to use Chroma Key, selecting the background and key images.
3
Turn the MODE knob to “CHR.”
The LVS-400 switches to Chroma-Key mode.
4
In Normal mode, hold down either [MIX], [WIPE 1], or [WIPE 2] for at least three
seconds. In A/B mode, hold down [EFFECTS] for at least three seconds.
seconds. In A/B mode, hold down [EFFECTS] for at least three seconds.
“KeyColor = ***” (“***” indicates the color type) appears in the monitor display
connected to the MONITOR OUT connector.
connected to the MONITOR OUT connector.
5
While continuing to hold down the button when you choose in step 4, turn the
TRANSITION TIME knob.
TRANSITION TIME knob.
Select the color to be used as the key color. The monitor display then changes to
“KeyColor = ***.”
“KeyColor = ***.”
The following shows the colors you can select as key colors.
Changing the Chroma-Key (Key Composite) Color
KeyColor
KeyColor
01
Blue-Magenta
07
Cyan-Green
02
Blue-Cyan
(original factory condition)
(original factory condition)
08
Green-Cyan
03
Red-Magenta
09
Green-Red
04
Red-Yellow
10
Cyan-blue
05
Magenta-Red
11
Yellow-Green
06
Magenta-Blue
12
Yellow-Red
TRANSITION TIME
B-BUS
B-BUS
TRANSITION
LEVEL
MIX
MODE
WIPE
EFFECTS
5
5
Changes in the Key Color
setting are saved even when
the power is turned off.
setting are saved even when
the power is turned off.
LVS-400v2_e1.book 12 ページ ２００４年８月１０日 火曜日 午後５時７分