Savin is200e Installation Instruction

Configuring Settings Using a Web Browser

❖

❖ LDAP Server IP Address

Enter this item when you have selected [LDAP Authentication]. You can configure
this by entering the numeric characters from 0 to 9 in the form of xxx.xxx.xxx.xxx,
respective sections of this address can be configured from 000 to 255.

❖

❖ Search Base

This item is to configure the search base at time of [LDAP Authentication]. You
can enter the LDAP Directory for the LDAP authentication.

Note

❒ Be sure to reboot the system after this configuration.

Information to Register in [Time Server]

It can assign a poling interval of the time server, by using: [Configuration]

→[Basic

Settings]

→[Time Server]

Note

❒ Be sure to reboot the system after this configuration.

❖

❖ Time Server IP Address

This assigns the IP address of the time server using numeric from 0 to 9. If you
do not use the time server, specify “000.000.000.000”. “225.225.225.225” is
prohibited to use.

❖

❖ Polling Interval

Configure the poling interval by selecting either [When Scanner On] or [Con-
stant Intervals]

with the radio button if you have selected [Constant Intervals] en-

ter numeral within a range of 15 to 10080.

Note

❒ You can view all the information displayed, regardless of the screen size, but

the character line may be returned. A scroll bar may be equipped.

❒ When you shift to another screen during configuration, the configured data

will be discarded at the time.

Information to register in [Send File Path]

You can register a path for sending scanned data to a shared folder using SMB.
Up to 1000 destination folders can be registered.

Reference

See the Web Status Monitor Help for information about how to register a
Send File Path.