Savin is200e Installation Instruction

Appendix

186

Cannot detect the scan size.

Check whether the original is

set, then select the proper

size. 

The original is not on the exposure glass, or it 
is placed but the scan size cannot be automati-
cally detected.
• If the original is not there, place it on the ex-

posure glass.

• Because the scanner detects the scan size 

when the ADF is opened and closed, make 
sure you open the ADF to an angle of 30 de-
grees or more.

 

Exceeded Job Delivery Data Max. 

Scanning will be stopped and 

the scanned data will be delet-

ed. 

 

 [Exit] 

Scanning of the first original has failed.

• Confirm the setting in [4.Scan Settings] 

→ 

. If “Color:Full Color” is select-

ed, change to another option. “Black and 
White:Text” is good for scanning most 
monochrome originals, and even “Black 
and White:Text/Photo” is enough for scan-
ning originals in 2 colors (e.g. an original 
containing text printed in black and charts 
drawn in red).

• Confirm the setting in [4.Scan Settings] 

→ 

. Specify a lower resolution, if 

the current setting is unnecessarily high. 
Normally, 200dpi or lower resolution set-
ting is enough for scanning text.

• Set [Compression (Black and White)] in [2.Send 

 to “On” when [Scan Type] in 

 is set to one of the “Black 

and White” options.
Set [Compression (Gray Scale/Full Color] in 
[2.Send Scan Settings]

 to an option that is 

higher than the current setting, when [Scan 
Type]

 in [4.Scan Settings] is set to one of the 

“Color” options.

• Make the value of the following settings 

larger using the Web Status Monitor:

•  [Configuration] 

→ [E-mail Settings] → [E-

 

→ [Max. E-mail Size] when sending 

scan data as an e-mail attachment

•  [Configuration] 

→ [Delivery Settings] → 

 

→ [Job Delivery Data Max. Set-

 when sending scan data using a 

delivery server

•  [Configuration] 

→ [File Send Settings] → 

 

→ [Job Delivery Data Max. Set-

 when sending scan data to a Win-

dows shared folder or an FTP server