Savin is200e Installation Instruction
Cleaning
195
11
Cleaning
R WARNING:
R CAUTION:
We recommend periodically cleaning
the scanner to ensure that it is in opti-
mum operating condition. First, wipe
off the scanner with a dry, soft cloth.
Next, dampen a soft cloth with water,
wring it out tightly, and then wipe off
the scanner. Use a neutral detergent
for exterior portions of the scanner
where soiling cannot be removed
with water alone. Wipe off the rubber
rollers with ethyl alcohol, and then
wipe with a cloth dampened with wa-
ter. Finally, wipe off the rollers and
exterior with a dry cloth to remove
any excess moisture.
the scanner to ensure that it is in opti-
mum operating condition. First, wipe
off the scanner with a dry, soft cloth.
Next, dampen a soft cloth with water,
wring it out tightly, and then wipe off
the scanner. Use a neutral detergent
for exterior portions of the scanner
where soiling cannot be removed
with water alone. Wipe off the rubber
rollers with ethyl alcohol, and then
wipe with a cloth dampened with wa-
ter. Finally, wipe off the rollers and
exterior with a dry cloth to remove
any excess moisture.
Important
❒ Do not use volatile chemicals such
as benzene, paint thinner or spray
with insecticides. This can cause
deformation, discoloration and
cracking.
with insecticides. This can cause
deformation, discoloration and
cracking.
❒ Wipe off the Automatic Document
Feeder (ADF) with a dry, clean
cloth when there is dust or soiling
present inside.
cloth when there is dust or soiling
present inside.
Cleaning ADF Lifting Up
R CAUTION:
AAAA
Turn off the power of the scanner
and unplug the power cable from
the outlet.
and unplug the power cable from
the outlet.
BBBB
Wipe off the exposure glass, ADF
exposure glass and white sheet
with a dry, soft cloth.
exposure glass and white sheet
with a dry, soft cloth.
1.
White Sheet
2.
ADF Exposure Glass
3.
Exposure Glass
• Never remove any covers or
screws other than those spec-
ified in this manual. The inside
of the scanner contains high-
voltage components that can
cause electrical shock. Have
all inspections, adjustments,
and repairs inside the scanner
performed by an authorized
dealer only.
ified in this manual. The inside
of the scanner contains high-
voltage components that can
cause electrical shock. Have
all inspections, adjustments,
and repairs inside the scanner
performed by an authorized
dealer only.
• Do not attempt to modify this
scanner in any way. Modifica-
tion can cause fire or electrical
shock.
tion can cause fire or electrical
shock.
• When disconnecting the power
cord, always make sure to hold
onto the plug. Do not pull on the
power cord itself. This can cause
damage to the cord, fire or elec-
trical shock.
onto the plug. Do not pull on the
power cord itself. This can cause
damage to the cord, fire or elec-
trical shock.
• Be careful not to pinch your fin-
gers when closing the Automatic
Document Feeder (ADF).
Document Feeder (ADF).
AFJ012S