Enterasys mrxi-22 User Guide

5. Tighten each of the anchor screws until the anchor expands holding 

the anchor firmly in the wall, then remove the screws completely.

6. Position the MRXI on the wall over the anchors and reinstall the four 

anchor screws to attach the MRXI to the wall, as shown in Figure 3-5. 
Tighten the four anchor screws.

For a free-standing shelf or tabletop installation, locate the MRXI within 
7 feet of its power source and with an unrestricted free surface area 21 
inches wide, 18 inches deep, and 6 inches high, as shown in Figure 3-6.

Molly Anchor