Enterasys a2h123-24 User Manual
SecureStack A2 Installation Guide
1-1
1
Introduction
This chapter introduces the A2H123‐24 stackable switch.
Overview
The A2H123‐24 is a stackable Fast Ethernet switch, which can be adapted and scaled to
help meet your network needs. This switch provides a management platform and uplink
to a network backbone for a stacked group of up to eight A2 switches. The two fixed LC
connectors provide fiber‐optic connections to a 100BASE‐FX network.
help meet your network needs. This switch provides a management platform and uplink
to a network backbone for a stacked group of up to eight A2 switches. The two fixed LC
connectors provide fiber‐optic connections to a 100BASE‐FX network.
The switch also supports the use of a redundant DC power supply to help prevent
downtime due to an internal power supply failure in the switch or AC power source.
downtime due to an internal power supply failure in the switch or AC power source.
You can install the SecureStack A2
on a flat surface or into a standard 19‐inch rack with
user‐supplied mounting hardware, and configure the SecureStack A2 functions using the
WebView™ application, CLI switching commands, and/or SNMP.
WebView™ application, CLI switching commands, and/or SNMP.
A2H123-24 Switch
The A2H123‐24 (
) has several types of front panel port connections, which
include:
•
24 RJ45 ports (10/100 Mbps, 100BASE‐T copper ports).
•
Two fixed LC connectors, labeled port 27 and 28, that provide 100BASE‐FX fiber‐optic
connections.
connections.
For information about...
Refer to page...