TP-LINK TL-WR841N User Guide

 

  

25

If you want to do some advanced configurations, please click the Advanced button, and the page 

shown in Figure 4-9 will then appear: 

 

Figure 4-9 PPPoE Advanced Settings 

¾

 

 The default MTU size is “1492” bytes, which is usually fine. It is not 

recommended that you change the default MTU Size unless required by your ISP. 

¾

 

 The service name and AC (Access Concentrator) name, which 

should not be configured unless you are sure it is necessary for your ISP.

 

In most cases, 

leaving these fields blank will work. 

¾

  ISP Specified IP Address - If your ISP does not automatically assign IP addresses to the     

router during login, please click “Use IP address specified by ISP” check box and enter the 
IP address provided by your ISP in dotted-decimal notation. 

¾

 

 The router will detect Access Concentrator online at every interval. 

The default value is “0”. You can input the value between “0”and “120”. The value “0” means 

no detect. 

¾

 

If your ISP does not automatically assign DNS addresses to the router 

during login, please click “Use the following DNS servers” check box and enter the IP 

address in dotted-decimal notation of your ISP’s primary DNS server. If a secondary DNS 

server address is available, enter it as well. 

Click the Save button to save your settings.