Rocketfish RF-RBWS02 User Guide
13
RF-RBWS02
3
Replace the bottom cover on the speaker and fasten with the three
screws you removed.
Charging the wireless speaker
When the battery power becomes low, the charge indicator light will
initially blink, indicating the need to charge the speaker. If it does not
receive a charge, the indicator light will eventually go off.
initially blink, indicating the need to charge the speaker. If it does not
receive a charge, the indicator light will eventually go off.
Caution: To avoid the risk of fire, and to prevent damage, only use the DC to AC
adapter supplied with your wireless speaker kit.
Make sure that the power supply outlet matches the unit AC input of 100 - 240V
before connection.
before connection.
To charge the wireless speaker batteries:
• Connect one end of the AC adapter to the DC IN jack of the wireless
speaker, and then plug the other end into an AC power outlet.
• The CHARGE indicator blinks green (slowly) to indicate that the
wireless speaker is in charging mode.
• When the wireless speaker is fully charged (about 16 hours on
5000mAh NiMH batteries), the CHARGE indicator changes to a solid
illumination, indicating charging is complete.
illumination, indicating charging is complete.
8 NiMH C cells or alkalines
(not provided)
(not provided)
Bottom of the wireless speaker
RF-RBWS02_09-0535_MAN_ENG_V1.fm Page 13 Thursday, August 27, 2009 7:39 PM