Pantech crossover Specification Guide
66
Connectivity
Adding a Wi-Fi network
1. Press
n, tap Settings from the Home screen.
2. Tap
Wireless & networks > Wi-Fi settings.
3. Tap
Wi-Fi to activate the technology.
4. Tap
Add Wi-Fi network.
5. Enter Network SSID and select the security type among
Open, WEP, WPA/WPA2 PSK and 802.1x EAP. Aside from
Open, you must enter a password for the network.
Open, you must enter a password for the network.
6. Tap
Save.
Disconnecting to a Wi-Fi network
1. Press
n, tap Settings from the Home screen.
2. Tap
Wireless & networks > Wi-Fi settings.
3. Tap the network that is connected to Crossover.
4. Tap
Forget to disconnect with the network.
Note You can also disconnect to the Wi-Fi network by pressing and
holding the network and tapping
holding the network and tapping
Forget network.
Connecting to a 3G network
Use 3G (or EDGE if available) to connect Crossover to the
Internet and exchange multimedia messages. You will need a
data plan to access a 3G network.
Internet and exchange multimedia messages. You will need a
data plan to access a 3G network.
3G settings are already preconfigured on Crossover, and it is
ready to use 3G services. Please do not change the settings:
this may cause services to stop working.
ready to use 3G services. Please do not change the settings:
this may cause services to stop working.
Note Using 3G loads Internet data faster in some cases, but may
decrease battery performance. If you are making a lot of phone calls,
you may want to turn 3G function off to extend battery performance.
decrease battery performance. If you are making a lot of phone calls,
you may want to turn 3G function off to extend battery performance.
Using Bluetooth
Bluetooth technology enables wireless connections between
electronic devices. Using this technology, you can send
images, text, and business cards.
electronic devices. Using this technology, you can send
images, text, and business cards.
With Bluetooth technology, Crossover provides:
x
Connection to hands-free devices.
x
Connection to electronic devices.
Pairing with devices
1. Press
n, tap Settings from the Home screen.
2. Tap
Wireless & networks > Bluetooth settings.
3. Tap
Bluetooth to activate the technology.
4. Tap
Scan for devices.
5. Select and tap a device from the list.
6. Tap
Pair to connect to and pair with the device.
Scanning devices
Requesting pairing