Pantech crossover Guida Specifiche

66

Connectivity

Adding a Wi-Fi network

1. Press 

n, tap Settings from the Home screen.

2. Tap 

Wireless & networks > Wi-Fi settings.

3. Tap 

Wi-Fi to activate the technology.

4. Tap 

Add Wi-Fi network.

5.  Enter Network SSID and select the security type among 

Open, WEP, WPA/WPA2 PSK and 802.1x EAP. Aside from 
Open, you must enter a password for the network.

6. Tap 

Save.

Disconnecting to a Wi-Fi network

1. Press 

n, tap Settings from the Home screen.

2. Tap 

Wireless & networks > Wi-Fi settings.

3.  Tap the network that is connected to Crossover.

4. Tap 

Forget to disconnect with the network.

Note You can also disconnect to the Wi-Fi network by pressing and 
holding the network and tapping 

Forget network.

Connecting to a 3G network

Use 3G (or EDGE if available) to connect Crossover to the 
Internet and exchange multimedia messages. You will need a 
data plan to access a 3G network.

3G settings are already preconfigured on Crossover, and it is 
ready to use 3G services. Please do not change the settings: 
this may cause services to stop working. 

Note Using 3G loads Internet data faster in some cases, but may 
decrease battery performance. If you are making a lot of phone calls, 
you may want to turn 3G function off to extend battery performance.

Using Bluetooth

Bluetooth technology enables wireless connections between 
electronic devices. Using this technology, you can send 
images, text, and business cards.

With Bluetooth technology, Crossover provides:

 

x

Connection to hands-free devices.

 

x

Connection to electronic devices.

Pairing with devices

1. Press 

n, tap Settings from the Home screen.

2. Tap 

Wireless & networks > Bluetooth settings.

3. Tap 

Bluetooth to activate the technology.

4. Tap 

Scan for devices.

5.  Select and tap a device from the list.

6. Tap 

Pair to connect to and pair with the device.

Scanning devices

Requesting pairing