NEC LCD1565 User Manual

° 20°

Quick Start

Instructions for Stand Setup

Step 1: After unpacking, using the original packing cushion, place the LCD monitor on a

flat surface.

Step 2: Pull the upper side of the stand.
Step 3: While avoiding the cables, pull the bottom side of the stand upward until it is

locked into position.

Step 4: While avoiding the cables, pull the upper side of the stand into the locked

position.

Step 5: Lift the LCD out of the packing cushion by the base into an upright and locked

position.

Step 6: Adjust the LCD monitor for preferred viewing angle. The working angle for the

hinge is 5 degrees forward and 20 degrees backward.
NOTE: Slowly adjust the LCD to avoid finger injury.

CAUTION:
Avoid all cables

CAUTION: Gently place
stand on surface to avoid
scratching or damage to
the base.

Step 6

Step 5

Step 4

Step 3

Step 2

Step 1

LCD15651765manual.p65

5/27/03, 8:31 AM