NEC LCD1565 Manuel D’Utilisation
![NEC](https://files.manualsbrain.com/attachments/44abc27a7ab3d3ebaea5604c1237604964b3b528/common/fit/150/50/0a4ba346278cf7fed7416c8056bd03af105e868674aa2dfa47e23e007d42/brand_logo.png)
3
5
° 20°
50
°
28
°
Quick Start
Instructions for Stand Setup
Step 1: After unpacking, using the original packing cushion, place the LCD monitor on a
flat surface.
Step 2: Pull the upper side of the stand.
Step 3: While avoiding the cables, pull the bottom side of the stand upward until it is
Step 3: While avoiding the cables, pull the bottom side of the stand upward until it is
locked into position.
Step 4: While avoiding the cables, pull the upper side of the stand into the locked
position.
Step 5: Lift the LCD out of the packing cushion by the base into an upright and locked
position.
Step 6: Adjust the LCD monitor for preferred viewing angle. The working angle for the
hinge is 5 degrees forward and 20 degrees backward.
NOTE: Slowly adjust the LCD to avoid finger injury.
NOTE: Slowly adjust the LCD to avoid finger injury.
CAUTION:
Avoid all cables
Avoid all cables
CAUTION: Gently place
stand on surface to avoid
scratching or damage to
the base.
stand on surface to avoid
scratching or damage to
the base.
Step 6
Step 5
Step 4
Step 3
Step 2
Step 1
LCD15651765manual.p65
5/27/03, 8:31 AM
3