Sony HT-DDW665 User Guide
masterpage:Left
lename[E:\SEM_Janet\J9040000_4252086821DDW665US\4252086821\GB03CON_HT-
DDW665-US.fm]
10
US
model name1[HT-DDW665]
[4-252-086-82(1)]
Connect the AC power cord to a wall outlet.
Performing initial setup
operations
operations
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure.
This procedure can also be used to return
settings you have made to their factory defaults.
Use the buttons on the receiver for the operation.
initialize the receiver by performing the
following procedure.
This procedure can also be used to return
settings you have made to their factory defaults.
Use the buttons on the receiver for the operation.
1
Press ?/1 to turn off the receiver.
2
Hold down ?/1 for 5 seconds.
“PUSH” and “ENTER” appears in the
display alternatingly.
display alternatingly.
3
Press ENTER.
“ CLEARING” appears in the display for a
while, then “CLEARED” appears.
The following are reset to their factory
settings.
• All settings in the SET UP, LEVEL,
while, then “CLEARED” appears.
The following are reset to their factory
settings.
• All settings in the SET UP, LEVEL,
TONE and CUSTOMIZE menus.
• The sound field memorized for each
input and preset station.
• All sound field parameters.
• All preset stations.
• All index names for inputs and preset
• All preset stations.
• All index names for inputs and preset
stations.
• MASTER VOLUME –/+ is set to “VOL
MIN”.
4: Connecting the AC
power cord
power cord
To a wall outlet
AC power cord
GB01COV_HT-DDW665-US.book Page 10 Monday, April 26, 2004 10:03 AM