ATTO Technology diamond array s User Manual

33

 

ATTO Technology Inc. Diamond Storage Array Installation and Operation Manual

FirmwareRestart
Causes a warm restart of the Diamond Storage Array.

Immediate: FirmwareRestart

Help
Displays a list of available commands. Type help 
followed by a command name to display detailed 
command-specific information.

Immediate: Help [Command Name]

RestoreConfiguration
Restores configuration to either the default configuration 
or the configuration last saved into non-volatile memory. 
The saved option will undo any changes made since the 
last save.

Immediate: RestoreConfiguration [Default|Saved]

SaveConfiguration
If the restart option is selected, the Diamond will cycle its 
power. The norestart option will save changes without 
restarting. Please note: certain modifications require a 
SaveConfiguration command and a system restart. If 
required, the return Ready. * will be displayed after the 

return for the modification. You may make several 
changes through commands and SaveConfiguration 
before implementing a restart, but once you have 
restarted the Diamond, all the command changes created 
before the restart and saved will be implemented. Restart 
or no Restart parameter is optional

Immediate: SaveConfiguration <Restart| NoRestart>

SystemSN
Stores the Diamond Storage Array serial number. The 
serial number may be one to 16 characters.

Set syntax: set SystemSN [n]
Get syntax: get SystemSN
Requires a SaveConfiguration command

VerboseMode
Specifies the detail of verbal feedback for the Command 
Line Interface. Disabling this option removes parameter 
names from ‘get’ commands and removes descriptions 
from ‘help’ commands.

Default: enabled (returns have parameter information)
Set syntax: set VerboseMode [enabled | disabled]
Get syntax: get VerboseMode