Sony VPL-FX50 User Guide

7 

(GB)

The PC CARD slot of INPUT B (VPL-PX15) or
INPUT C (VPL-FX50 and VPL-FE110U/M) on the
projector accepts one PCMCIA Type II PC card. To
connect to a LAN, it is required to insert the specified/
recommended LAN PC card (VPL-FE110U/M only)
or wireless LAN PC card into this slot.
You can also insert the recommended PC memory card
into this slot. Storing the file created with Microsoft
PowerPoint or Excel, or the image file in a memory
card enables you to project a file or run a presentation
without connecting to a computer.

• Do not turn off the projector or restart Windows CE

of the projector while the PC card is writing or
reading.

• Make sure to use the specified/recommended LAN

PC card, wireless LAN PC card or PC memory card.
For the specified/recommended cards, see the
supplied “Specified/recommended PC Card/Wireless
LAN Access Point.”

• The driver software for the specified/recommended

PC cards is installed into the projector at the factory.
Installing any other driver software is not required
and cannot be done.

To activate the networking function of the projector,
do the following setup.

x For VPL-PX15
Set INPUT-B FUNC. in the INSTALL SETTING
menu to ON.

x For VPL-FX50
Set INPUT-C FUNC. in the INSTALL SETTING
menu to ON.

x For VPL-FE110U/M
Set the INPUT C/RS-232C/RS-422A select switch on
the rear panel to INPUT C.

x For VPL-PX15 and VPL-FX50
When you operate the projector for setting up the
projector, running a slide show, etc., use the supplied
Remote Commander. Before operation, set the PJ/
NETWORK select switch on the Remote Commander
to NETWORK.
You cannot connect a mouse and keyboard to the
projector.

x For VPL-FE110U/M
When you operate the projector for setting up the
projector, running a presentation, etc., use of the RM-
PJM610 remote commander (not supplied) or
commercially available PS/2 mouse and keyboard is
required.

Connect the mouse and keyboard to the projector
before connecting the power cord of the projector to
the AC outlet.