Sony VPL-FX50 User Guide
8
(GB)
Setting Up the Projector
Setting Up from the Projector
Setting the password
You can set a password for protection against access
from remote network users.
from remote network users.
1
From the Start menu, click Control Panel in the
Network Projector window.
Network Projector window.
2
Double-click the Password icon.
The Password Properties dialog box appears.
The Password Properties dialog box appears.
Password Properties
Administrator
Name:
_
root
Password:
_
I
Confirm password:
_
User
Name:
_
Password:
_
Confirm password:
_
3
Specify the Password for Administrator, then enter
the same password again in the Confirm password
text box for Administrator.
The Name of Administrator is preset as “root” at
the factory. It cannot be changed.
text box for Administrator.
The Name of Administrator is preset as “root” at
the factory. It cannot be changed.
4
Specify the Name and Password for User, then
enter the same password in the Confirm password
text box for User.
text box for User.
When you are required to enter the password for
Administrator or User while you are operating the
projector from a computer, enter the Name and
Password which you set in steps
Administrator or User while you are operating the
projector from a computer, enter the Name and
Password which you set in steps
3
and
4
.
Basic setups such as IP address and wireless LAN
settings are necessary for networking operations of the
projector. You can set them up either from the
projector or a computer connected to the same LAN.
settings are necessary for networking operations of the
projector. You can set them up either from the
projector or a computer connected to the same LAN.
Before setting up
x For VPL-PX15 and VPL-FX50
• Turn on the projector with the #/ 1 key on the
• Turn on the projector with the #/ 1 key on the
supplied Remote Commander or control panel of the
projector.
projector.
• Confirm that INPUT-B FUNC. (VPL-PX15) or
INPUT-C FUNC. (VPL-FX50) in the INSTALL
SETTING menu is set to ON.
SETTING menu is set to ON.
• Press the INPUT key on the supplied Remote
Commander or control panel of the projector to select
INPUT B (VPL-PX15) or INPUT C (VPL-FX50).
The Network Projector window opens.
INPUT B (VPL-PX15) or INPUT C (VPL-FX50).
The Network Projector window opens.
• Set the PJ/NETWORK select switch on the Remote
Commander to NETWORK.
• When you set up from the projector, display the
screen keyboard on the projector and operate with the
supplied Remote Commander.
supplied Remote Commander.
For information on the screen keyboard, see page 29 (GB).
• Turn on the computer from which you set up the
projector.
x For VPL-FE110U/M
• Confirm that the INPUT C/RS-232C/RS-422A select
• Confirm that the INPUT C/RS-232C/RS-422A select
switch is set to INPUT C.
• Turn on the projector with the ON key on the RM-
PJM610 remote commander, supplied Remote
Commander or control panel of the projector.
Commander or control panel of the projector.
• Press the INPUT key on the RM-PJM610 or the
INPUT SELECT key on the supplied Remote
Commander or control panel of the projector to select
INPUT C. The Network Projector window opens.
Commander or control panel of the projector to select
INPUT C. The Network Projector window opens.
• When you set up from the projector, display the
screen keyboard on the projector and operate with the
connected mouse and keyboard, or the RM-PJM610
remote commander.
connected mouse and keyboard, or the RM-PJM610
remote commander.
For information on the screen keyboard, see page 29 (GB).
• Turn on the computer from which you set up the
projector.