Yamaha RX-V567 User Guide

Page of 98
 En
 75
APPENDIX
Troubleshooting
AM
iPod™/iPhone™
Problem
Cause
Remedy
See 
page
The desired station 
cannot be tuned into 
with the automatic 
tuning method.
The signal is weak, or the antenna 
connections are loose.
Adjust the AM loop antenna orientation.
Use the manual tuning method.
Automatic station 
preset does not 
work.
Automatic station preset is not 
available for AM stations.
Use manual station preset.
Continuous 
crackling and 
hissing noises are 
heard.
The supplied AM loop antenna is 
not connected.
Connect the AM loop antenna correctly 
even if you use an outdoor antenna.
The noises may be caused by 
lightning, fluorescent lamps, 
motors, thermostats, or other 
electrical equipment.
It is difficult to completely eliminate noise, 
but it can be reduced by installing and 
properly grounding an outdoor AM antenna.
Buzzing and whining 
noises are heard.
A TV set is being used nearby. 
Move this unit away from the TV set.
Display
Cause
Remedy
See 
page
Loading...
The unit is in the process of 
recognizing the connection with 
your iPod/iPhone.
The unit is in the middle of 
acquiring song lists from your 
iPod/iPhone.
Connect error
There is a problem with the signal 
path from your iPod/iPhone to the 
unit.
Turn off the unit and reconnect the Yamaha 
iPod universal dock to the DOCK jack of 
the unit.
Remove your iPod/iPhone from the Yamaha 
iPod universal dock and then place it back in 
the dock.
Unknown iPod
The iPod/iPhone being used is not 
supported by the unit.
Connect an iPod/iPhone supported by the 
unit.
iPod connected
Your iPod/iPhone is properly 
placed in the Yamaha iPod 
universal dock.
Disconnected
Your iPod/iPhone is removed from 
the Yamaha iPod universal dock.
Unable to play
The unit cannot playback the 
songs currently stored on your 
iPod/iPhone.
Check that songs are currently stored on 
your iPod/iPhone.