Yamaha HTR-5940 User Guide

t

Use this feature to select the component connected to the 
MULTI CH INPUT jacks (see page 22) as the input 
source.

MULTI CH INPUT

When “MULTI CH INPUT” is shown in the front panel display, 
no other source can be played. To select another input source with 
the INPUT selector on the front panel (or one of the input selector 
buttons), press MULTI CH INPUT (or MULTI CH IN on the 
remote control) so that “MULTI CH INPUT” disappears from the 
front panel display.

You can mix down multi-channel sources to 2 channels 
and enjoy playback in 2-channel stereo.

y

• You can use a subwoofer with this program when “BASS OUT” 

is set to “SWFR” or “BOTH” (see page 79).

• You can also select “2ch Stereo” by pressing the

 PROGRAM l / h buttons on the front panel.

When this unit is in the “STRAIGHT” mode, 2-channel 
stereo sources are output from only the front left and right 
speakers. Multi-channel sources are decoded straight into 
the appropriate channels without any additional effect 
processing.

To deactivate the “STRAIGHT” mode, press 
STRAIGHT on the remote control again so 
that “STRAIGHT” disappears from the front 
panel display.
The sound effect is turned back on.

y

You can also select “STRAIGHT” by pressing STRAIGHT 
(EFFECT) on the front panel.

2ch Stereo

STRAIGHT