Yamaha HTR-5940 User Guide

The following information appears in the front panel 
display for a few seconds.

Signal format
Signal format display. When this unit cannot detect a 
digital signal, it automatically switches to analog 
input.
Display status: Analog, Digital, Dolby Digital, DTS, 
PCM, Unknown Digital

“Unknown Digital” appears when this unit detects any 
undecodable digital signals.

in:

The number of source channels in the input signal 
(front/surround/LFE). For example, a multi-channel 
soundtrack with 3 front channels, 2 surround 
channels and LFE, is displayed as “3/2/LFE”.

fs:

The number of samples per second taken from a 
continuous signal to make a discrete signal.
Display status: 32kHz, 44.1kHz, 48kHz, 64kHz, 

88.2kHz, 96kHz

rate:

The number of bits passing a given point per second.

flg:

Flag data encoded in DTS, Dolby Digital, or PCM 
signals that cue this unit to automatically switch 
decoders.

y

When you are displaying information about the input source, this 
unit is in the “STRAIGHT” mode (see page 37). To turn back the 
sound effect on, press “STRAIGHT” again.

You can combine a video image from a video source with 
sound from an audio source. For example, you can enjoy 
listening to classical music while viewing beautiful 
scenery from the video source on the video monitor.

If you want to enjoy an audio source input at the MULTI CH 
INPUT jacks together with a video source, first select the video 
source and then press MULTI CH INPUT on the front panel (or 
MULTI CH IN on the remote control) to select “MULTI CH 
INPUT” as the input source (see page 37).