Yamaha rx-a2000 User Guide
SETUP
139
The Advanced Setup menu can be used for unit initialization and other useful extended functions. The Advanced Setup menu can be operated as follows.
Displaying/Setting the Advanced Setup
menu
menu
1
Switch this unit to the standby mode.
2
Press MAIN ZONE A while pressing and holding
STRAIGHT on the front panel.
STRAIGHT on the front panel.
Release STRAIGHT when “ADVANCED SETUP” is displayed
on the front panel display.
After a few seconds, the top menu items are displayed.
on the front panel display.
After a few seconds, the top menu items are displayed.
3
Press PROGRAM l / h repeatedly to select the item
to be set from the following items.
to be set from the following items.
In the Advanced Setup menu, you can set the following settings.
4
Press STRAIGHT repeatedly to select the value you
want to change.
want to change.
5
Switch this unit to the standby mode, and then
switch it on again.
switch it on again.
The settings become effective and the unit is powered on.
Setting the impedance of speakers
Changes the unit settings depending on the impedance of the
speakers connected.
speakers connected.
J1
Remote sensor
Activate or deactivate the signal-receiving capability of the remote
control sensor on the front panel of this unit.
control sensor on the front panel of this unit.
Extended functionality that can be configured as needed (Advanced Setup menu)
PROGRAM l / h
MAIN ZONE A
STRAIGHT
SPEAKER IMP.
Sets the impedance of speakers.
REMOTE SENSOR
Activate or deactivate the signal-receiving capability
of the remote control sensor.
REMOTE CON AMP
Changes the remote control ID of a receiver.
SIRIUS PIN
Resets the parental lock code for the SIRIUS Satellite
Radio tuner.
TV FORMAT
Specifies the TV’s color encoding format.
MONITOR CHECK
Removes the up-scaling limitation on HDMI video
output.
RECOV./BACKUP
Save and restore the settings of this unit.
INITIALIZE
Initializes various settings for this unit.
FIRM UPDATE
Update the firmware of this unit.
VERSION
Check the version of firmware currently installed on
this unit.
Select the impedance when 6
Ω speakers are
connected.
(Default)
Select the impedance when speakers above 8
Ω are
connected.
ON (Default)
Activate the signal-receiving capability of the remote
control sensor
OFF
Deactivate the signal-receiving capability of the
remote control sensor
“ON” is recommended in most cases.
S P E A K E R I M P .
8 M I N
6MIN
8MIN
R E M O T E S E N S O R
O N
J
1 :
For detailed procedures of speaker impedance settings, refer to “Changing
speaker impedance” (
speaker impedance” (