Yamaha rx-a2000 User Guide
SETUP
Extended functionality that can be configured as needed (Advanced Setup menu)
140
Avoiding crossing remote control
signals when using multiple
Yamaha receivers
signals when using multiple
Yamaha receivers
The remote control of the unit can only receive signals
from a receiver which has an identical ID (remote
control ID). When using multiple Yamaha AV receivers,
you can set each remote control with a unique remote
control ID for its corresponding receiver.
On the contrary, if you are setting the same remote
control ID for all receivers, you can use one remote
control to operate 2 receivers.
from a receiver which has an identical ID (remote
control ID). When using multiple Yamaha AV receivers,
you can set each remote control with a unique remote
control ID for its corresponding receiver.
On the contrary, if you are setting the same remote
control ID for all receivers, you can use one remote
control to operate 2 receivers.
Resetting the SIRIUS Satellite
Radio™ parental lock code
Radio™ parental lock code
Reset the SIRIUS Satellite Radio parental lock code to
the factory default setting. If you forget the code, it can
be reset.
the factory default setting. If you forget the code, it can
be reset.
Changing TV format
Change the color encoding format of OSD to PAL or
NTSC (default), to match the format used by the TV
connected via the HDMI OUT 1-2 or VIDEO
(MONITOR OUT) jack.
NTSC (default), to match the format used by the TV
connected via the HDMI OUT 1-2 or VIDEO
(MONITOR OUT) jack.
ENTER
3
2
1
6
9
8
7
0
SETUP
4
5
SOURCE
RECEIVER
AV
AUDIO
4
3
1
2
7
5
6
V-AUX
4
3
1
2
USB
MULTI
NET
PHONO
TUNER
DOCK
TUN./CH
SIRIUS
CATEGORY
[ A ]
v
i
l
B
ID1 (Default)
Receives the remote control signals set in
ID1.
ID2
Receives the remote control signals set in
ID2.
ID1 is set for both remote control and receiver by
default. To avoid crossing remote control, change the
remote control ID for both remote control and
receiver.
default. To avoid crossing remote control, change the
remote control ID for both remote control and
receiver.
R E M O T E C O N A M P
I D 1
■ To change the remote control ID
1
Press
BSETUP
.
2
Press
iCursor
B / C
repeatedly to select
“PRESET” and press
iENTER
.
3
Press
lRECEIVER A
and press
iENTER
.
4
Enter the desired remote control ID code.
To switch to ID1:
Enter “5019” using
Enter “5019” using
v
Numeric keys
or
i
Cursor
B / C / D / E
.
To switch to ID2:
Enter “5020” using
Enter “5020” using
v
Numeric keys
or
i
Cursor
B / C / D / E
.
5
Press
iENTER
to set the number.
“OK” appears in the display window if setting was
successful.
successful.
“NG” appears in the display window if the setting
was unsuccessful. In this case, start over from step
4.
was unsuccessful. In this case, start over from step
4.
6
Press
BSETUP
again to exit from the
setup menu.
Perform each of the following steps within 30
seconds. Settings will be automatically stopped if
more than 30 seconds passes since the last
operation. To reset, repeat from step 1.
seconds. Settings will be automatically stopped if
more than 30 seconds passes since the last
operation. To reset, repeat from step 1.
Returns to ID1 after the remote control code is
initialized (
initialized (
RESET
Resets the code to the factory default
setting.
CANCEL (Default)
Cancels resetting of the parental lock
code.
S I R I U S P I N
C A N C E L
T V F O R M A T
N T S C