Yamaha RX-V1065 User Guide
60
En
Operating various settings for this unit (Setup menu)
Changes input source names to be displayed on the front
panel display.
panel display.
Selecting a name to be displayed from templates
Press jCursor k / n to select the input source name to
edit and then press jCursor l / h to select a new
name from the following templates.
Press jCursor k / n to select the input source name to
edit and then press jCursor l / h to select a new
name from the following templates.
Entering an original name
Press jCursor k / n to select the input source name to
edit and then press jENTER. Enter up to 9 characters
by selecting one character at a time with the following key
operations.
Press jCursor k / n to select the input source name to
edit and then press jENTER. Enter up to 9 characters
by selecting one character at a time with the following key
operations.
The following characters are available for input.
A to Z, 0 to 9, a to z, symbols (#, *, –, +, etc.) and space
A to Z, 0 to 9, a to z, symbols (#, *, –, +, etc.) and space
Sets the maximum volume level and initial volume level
of Zone2.
of Zone2.
y
• These parameters are available only when “Extra Speaker Assignment”
is set to “Zone2” (page 56).
■ Zone2 Max Volume
Sets the maximum volume level of Zone2, so that the
volume will not be accidentally increased. For example,
you can adjust the volume between –80.0 dB and –5.0 dB
when you set this parameter to “–5.0dB”.
volume will not be accidentally increased. For example,
you can adjust the volume between –80.0 dB and –5.0 dB
when you set this parameter to “–5.0dB”.
■ Zone2 Initial Volume
Use this feature to set the volume level of Zone2 when the
power of Zone2 unit is turned on. When this parameter is
set to “Off”, the volume level used at the time when the
Zone2 unit was set to standby is applied.
power of Zone2 unit is turned on. When this parameter is
set to “Off”, the volume level used at the time when the
Zone2 unit was set to standby is applied.
Note
• If you set “Zone2 Max Volume” and “Zone2 Initial Volume”, the setting
of “Zone2 Max Volume” becomes effective. For example, if you set
“Zone2 Max Volume” to “–30.0dB” and “Zone2 Initial Volume” to
“0.0dB”, the volume is automatically set to “–30.0dB” at the next time
the Zone2 unit is turned on.
“Zone2 Max Volume” to “–30.0dB” and “Zone2 Initial Volume” to
“0.0dB”, the volume is automatically set to “–30.0dB” at the next time
the Zone2 unit is turned on.
You can set parameters for the sound field programs. For
details, see page 50.
details, see page 50.
Protects the Setup menu settings against accidental
alteration.
alteration.
Note
• When this parameter is switched to “On”, “
” appears at the top left
corner of the Setup menu screen.
Input Rename
– Blu-ray
– Satellite
– DVD
– VCR
– SetTopBox
– Tape
– Game
– MD
– TV
– PC
– DVR
– iPod
– CD
– HD DVD
– CD-R
– “blank”
jCursor l / h
Selects a character to edit.
jCursor k / n
Selects a character to enter.
jENTER
Enters a selected character.
Zone2
Adjustable range: –30.0dB to +15.0dB, +16.5dB* (5.0 dB step)
Adjustable range: Off*, Mute, –80.0dB to +16.5dB (0.5 dB step)
DSP Parameter
Memory Guard
Choices: Off*, On
Off
Not protect settings.
On
Protects the Setup menu settings (except for
“Decode Type” in “DSP Parameter” and
“Memory Guard”).
“Decode Type” in “DSP Parameter” and
“Memory Guard”).