Yamaha RX-V1065 User Guide

You can select and control Zone2 by using the control 
keys on the front panel or on the remote control. The 
available operations are as follows:
• Selecting the input source.
• Tuning into the desired station (when “TUNER” is 

selected as the input source)

• Tuning into the desired channel (when “XM” or 

“SIRIUS” is selected as the input source) (U.S.A. model 
only)

• Adjusting the volume of Zone2 (when Zone2 speakers 

are connected to the EXTRA SP terminals).

Before controlling Zone2 by using the control keys on the 
front panel or on the remote control, follow the procedure 
below to switch this unit to the Zone2 operation mode.

■ To control Zone2 by using the front panel 

Press CZONE2 CONTROL while Zone2 is 
turned on.
The ZONE2 indicator flashes on the front panel display 
for approximately 10 seconds.

• Complete each step while the ZONE2 indicator is flashing on the front 

panel display. Otherwise, the Zone2 mode is automatically canceled and 
this unit returns to the main zone operation mode.

■ To control Zone2 by using the remote control

Switch bMAIN/ZONE2 to the “ZONE2” 
position.

■ Turning on or set Zone2 to standby

Press AZONE2 ON/OFF (or pPOWER).

■ Operating Zone2

Rotate the RINPUT selector (or press dInput 
selection key) to select the desired input 
source.
• Select “AV5”, “AV6”, “AUDIO1”, “AUDIO2”, “V-

AUX” or “PHONO” to listen to the input source in 
Zone2.

• Select “TUNER” to use the FM/AM radio features 

• Select “USB” to use the USB features (page 45) in 

Zone2.

• Select “DOCK” to use the iPod features (page 42) or 

Bluetooth features (page 44) in Zone2.

• Select “SIRIUS” to use the SIRIUS Satellite Radio 

features (page 37) in Zone2.

• Select “XM” to use the XM Satellite Radio features 

(page 33) in Zone2.