Yamaha RX-V2700 Owner's Manual

■

Use this feature to assign the input/output jacks according 
to the component to be used if the initial settings of this 
unit do not correspond to your needs. Change the 
following parameters to reassign the respective jacks and 
effectively connect more components.
Once the input/output jacks are reassigned, you can select 
the corresponding component by using the INPUT 
selector on the front panel (or the input selector buttons on 
the remote control).

1

1

• You cannot select a specific item more than once for the same 

type of jack.

• When you connect a component to both the COAXIAL and 

OPTICAL jacks, priority is given to signals input at the 
COAXIAL jack.

■

This unit comes with a variety of input jacks. You can 
select the type of input signal you want to use.
Choices: 

, HDMI, Coax/Opt, Analog

• Select “Auto” when you want signals to be input to this 

unit in the following order: HDMI signals, digital 
signals and analog signals.

• Select “HDMI” when you only want HDMI signals to 

be input to this unit. If no HDMI signals are input, no 
sound is output.

• Select “Coax/Opt” when you want digital signals to be 

input to this unit at the OPTICAL or COAXIAL jacks. 
Use if HDMI signals are also being input.

• Select “Analog” when you only want analog signals to 

be input to this unit. If no analog signals are input, no 
sound is output.

y

• You can also select the audio input jack by pressing AUDIO 

SELECT on the front panel (or AUDIO SEL on the remote 
control). See page 42 for details.

• You can set the default Audio input jack select of this unit by 

using “Audio Select” in “Option” (see page 114).

This feature is not available when no digital input jack 
(OPTICAL, COAXIAL and HDMI) are assigned. In addition, 
“HDMI” is not available as an Audio input jack select setting 
when the HDMI IN 1, HDMI IN 2 and HDMI IN 3 jacks are not 
used. Use “I/O Assignment” in “Input Select” to reassign the 
respective input jack (see page 96).

■

Use this feature to switch the input mode. You can 
designate the reassigned digital input jacks (see page 96) 
for specific audio signals (DTS, etc.).

Choices: 

, DTS

• Select “Auto” if you want this unit to automatically 

detect input signal types and select the appropriate 
input mode.

• Select “DTS” if you want this unit to select DTS as the 

input mode.