Yamaha RX-V2700 Owner's Manual

■

Use this feature to adjust the level of the signal input at 
each input source. This is useful if you want to balance the 
level of each input source to avoid sudden changes in 
volume when switching between input sources.
Control range: –6.0 dB to +6.0 dB
Initial setting: 0.0 dB

y

This parameter also affects the signals output at ZONE OUT 
jacks.

• You can only adjust the volume for the current input source 

using this setting.

■

Use this feature to change the name of the inputs in the 
GUI screen or the front panel display menu. (DVD is used 
as the source component in the following example.)

l 

h

k

n

l 

h

• You can use up to 8 characters for each input.
• Press n to change the character in the following 

order, or press k to go in the reverse order:
CAPITAL A to Z, space
SMALL 

a to z, space

FIGURE

0 to 9, space

MARK

!, #, %, &, etc.

• Press ENTER to switch between character types.
• Repeat steps 1 to 3 to rename each input.

Even if you select “Français”, “Deutsch”, 

Espaсol” or 

“

Русский” in “Language” (see page 117), you cannot use 

accent symbols or cyrillic alphabets for the name of each 
input.

l 

h

y

• Select “RESET” to set the name of the selected input to default.
• This feature is useful when you change the input or output 

assignment for digital jacks and component video input jacks.

• You can also change the name of the input source that appears 

in the display window on the remote control. Refer to 
“Changing source names in the display window” on page 123”.

You can only change the name of the current input source 
(except for multi channel input sources) using this setting.