Yamaha RX-V2700 Owner's Manual
110
En
GRAPHIC USER INTERFACE (GUI) SCREEN
DNS Server (P) (Primary DNS server)
DNS Server (S) (Secondary DNS server)
DNS Server (S) (Secondary DNS server)
Use this parameter to specify the IP address of the primary
and secondary DNS (Domain Name System) servers.
and secondary DNS (Domain Name System) servers.
If you have only one DNS address, enter the DNS address in
“DNS Server (P)”. If you have two or more DNS addresses, enter
one of them in “DNS Server (P)” and another in
“DNS Server (S)”.
“DNS Server (P)”. If you have two or more DNS addresses, enter
one of them in “DNS Server (P)” and another in
“DNS Server (S)”.
Setup (Setup)
Select “Setup” to confirm the settings of the “Network”
parameters.
parameters.
1
Press
k
/
n
on the remote control repeatedly
and then press
h
to select and enter the
desired network parameter.
When “DHCP” is set to “ON”, you cannot select and adjust
any other network settings. To specify the other parameters,
you need to first set “DHCP” to “OFF”.
any other network settings. To specify the other parameters,
you need to first set “DHCP” to “OFF”.
2
To specify the parameter, press
k
/
n
repeatedly
to change the number and press
l
/
h
to select
the digit to change.
3
Press ENTER to confirm the parameter.
4
5
Select “Setup” and then press ENTER to
finish configuration.
finish configuration.
In case you have changed your network configuration, you may
need to reconfigure the network settings again.
need to reconfigure the network settings again.
y
You can reset the network settings of this unit to the initial factory
settings by using “N-RESET” in the advanced setup menu (see
page 136).
settings by using “N-RESET” in the advanced setup menu (see
page 136).
■
Play Style (Playback styles)
Use this feature to adjust the playback style according to
your preference. You can shuffle songs in a random order
or repeat one specific song or a sequence of songs.
your preference. You can shuffle songs in a random order
or repeat one specific song or a sequence of songs.
Repeat (Repeat)
Use this feature to set this unit to repeat one song or a
sequence of songs.
Choices:
sequence of songs.
Choices:
Off
, Single, All
• Select “Off” to deactivate this feature.
• Select “Single” to set this unit to repeat one song.
• Select “All” to set this unit to repeat a sequence of
• Select “Single” to set this unit to repeat one song.
• Select “All” to set this unit to repeat a sequence of
songs.
• When “Repeat” is set to a setting other than “Off”, “
” or
“
” appears in the top right corner of the playback status
screen while one song or a sequence of songs are being
repeated.
repeated.
• If “Repeat” is set to “Single”, the setting will be reset to “Off”
when the main zone, Zone 2 and Zone 3 are turned off.
Shuffle (Shuffle)
Use this feature to set this unit to play songs or albums in a
random order.
Choices:
random order.
Choices:
Off
, On
• Select “Off” to deactivate this feature.
• Select “On” to set this unit to play songs or albums in a
• Select “On” to set this unit to play songs or albums in a
random order.
When “Shuffle” is set to “On”, “
” appears in the top right
corner of the playback status screen while songs or albums are
being shuffled.
being shuffled.
Note
Note
Note
Notes
Note
Shuffle
Repeat
Information
Network
Play Style