Yamaha RX-V2700 Owner's Manual

■

Use this feature to adjust the brightness of the front panel 
display.
Control range: – 4 to 

Use this feature to set whether to display the information 
(such as song title or channel name) in the front panel 
display in a continuous manner or by the first 14 
alphanumeric characters after scrolling all characters once 
when “XM”, “DOCK” or “NET/USB” is selected as the 
input source.
Choices: 

, Once

• Select “Continue” to display the operation status in the 

front panel display in a continuous manner.

• Select “Once” to display the operation status in the 

front panel display by the first 14 alphanumeric 
characters after scrolling all characters once.

■

Use this feature to select whether this unit charges the 
battery of the stationed iPod or not when this unit is in the 
standby mode (see page 75).
Choices: Off, 

• Select “Off” to charge the battery of the stationed iPod 

only when this unit is turned on.

• Select “Auto” to charge the battery of the stationed 

iPod when this unit is turned on and in the standby 
mode.

■

Use this feature to display the operational status of Zone 2 
as well as Zone 3 on the Zone 2 video monitor connected 
to the ZONE VIDEO jacks on the rear panel of this unit. 
The Zone 2 and Zone 3 information to be displayed is 
listed as follows:
• The input source of Zone 2 and Zone 3
• The volume level of Zone 2 and Zone 3
• The audio mute status of Zone 2 and Zone 3
• The tonal quality status of Zone 2 and Zone 3
• The XM Satellite Radio information when XM is 

selected as the input source of Zone 2 and Zone 3

Choices: Off, Zone2, 

• Select “Off” not to display any operational status of 

Zone 2 and Zone 3 on the Zone 2 video monitor.

• Select “Zone2” to display the operational status of 

Zone 2 only on the Zone 2 video monitor.

• Select “Zone2&Zone3” to display the operational 

status of Zone 2 and Zone 3 on the Zone 2 video 
monitor.

• If “Zone OSD” is set to “Zone2&Zone3”, changes to the 

operational status of Zone 3 is displayed on the Zone 2 video 
monitor. For example, if the input source of Zone 3 is changed 
while you are watching TV in Zone 2, the name of the changed 
input source of Zone 3 is displayed on your TV in Zone 2.

• If “Zone OSD” is set to “Zone2&Zone3”, the display contents 

of Zone 2 and Zone 3 depends on whether or not Zone 2 and 
Zone 3 are turned on with ZONE 2 ON/OFF and ZONE 3 ON/
OFF on the front panel (see page 131).
– If both Zone 2 and Zone 3 are turned on, the video signals of 

the current input source of Zone 2 and the corresponding OSD 
are displayed on the Zone 2 video monitor.

– If Zone 2 is turned off and Zone 3 is turned on, only the 

corresponding OSD is displayed in the gray background 
regardless of the REC OUT/ZONE 2 status on the front panel.

– If Zone 2 is turned on and Zone 3 is turned off, the video 

signals of the current input source of Zone 2 and the 
corresponding OSD are displayed on the Zone 2 video 
monitor.

– If both Zone 2 and Zone 3 are turned off, no video signals and 

no OSD are displayed on the Zone 2 video monitor.