Yamaha RX-V2700 Owner's Manual

■

Use to select how the Zone 2 and/or Zone 3 speakers are 
amplified.
Choices: 

, INT:[SP1], INT:[SP2], INT:Both

• Select “EXT” if you want to connect your Zone 2 or 

Zone 3 speakers through an external amplifier 
connected to the ZONE 2 OUTPUT or ZONE 3 
OUTPUT jacks on the rear panel of this unit.

• Select “INT:[SP1]” to use the internal surround back 

amplifier of this unit when you want to connect your 
Zone 2 or Zone 3 speakers directly to the SP1 speaker 
terminals on the rear panel of this unit.

• Select “INT:[SP2]” to use the internal surround 

amplifier of this unit when you want to connect your 
Zone 2 or Zone 3 speakers directly to the SP2 speaker 
terminals on the rear panel of this unit.

• Select “INT:Both” to use the internal surround and 

surround back amplifiers of this unit when you want to 
connect your Zone 2 or Zone 3 speakers directly to 
both the SP1 and the SP2 speaker terminals on the rear 
panel of this unit.

• When “BI-AMP” is set to “ON” in the “ADVANCED SETUP” 

menu, “INT:[SP1]”, “INT:[SP2]” and “INT:Both” cannot be 
selected.

• When “INT:Both” is selected for “ZONE2 AMP”, only “EXT” 

can be selected for “ZONE3 AMP”.

• When “INT:Both” is selected for “ZONE3 AMP”, only “EXT” 

can be selected for “ZONE2 AMP”.

• When you set “ZONE2 AMP” or “ZONE3 AMP” to 

“INT:[SP1]” or “INT:[SP2]” and the corresponding zone is 
turned on, no sound is output from the surround back speakers.

• When you set “ZONE2 AMP” or “ZONE3 AMP” to 

“INT:Both” and the corresponding zone is turned on, no sound 
is output from both the surround speakers and the surround back 
speakers in the main zone.

• When both “ZONE2 AMP” and “ZONE3 AMP” are set to 

“INT:[SP1]” or “INT:[SP2]” and Zone 2 and Zone 3 are turned 
on, no sound is output from both the surround speakers and the 
surround back speakers in the main zone.

• When you use internal amplifiers for Zone 2 or Zone 3, some 

surround field programs may not work in the same way as when 
you do not use the internal amplifiers for Zone 2 or Zone 3.

Use this feature to select how the volume control will 
operate with regard to the ZONE 2 OUTPUT or ZONE 3 
OUTPUT jacks.
Choices: Fixed, 

• Select “Fixed” to fix the ZONE 3 OUTPUT volume 

level to a standard line level.

• Select “Variable” to adjust the ZONE 3 OUTPUT 

volume simultaneously using VOL +/– on the remote 
control.

Use this feature to set the maximum volume level in the 
Zone 2 or Zone 3. 
Control range: 

, 15.0 dB to – 30.0 dB

Control step: 5.0 dB

The “Zone2 Max Vol.” or “Zone3 Max Vol.” setting takes priority 
over the “Zone2 Initial Vol.” or “Zone3 Initial Vol.” setting. For 
example, “Zone2 Initial Vol.” is set to –20.0 dB and then “Zone2 
Max Vol.” is set to –30.0 dB, the volume level is automatically set 
to –30.0 dB when you turn on the power of this unit next time.‘