Yamaha RX-V2700 Owner's Manual

• Select TUNER as the input source to use the TUNER 

features in the selected zone. For details about the 
TUNER operations, see “FM/AM TUNING” on 
page 56.

• Select XM as the input source to use the XM Satellite 

Radio features in the selected zone. For details about 
the XM Satellite Radio operations, see “XM 
SATELLITE RADIO TUNING” on page 63.

The selected input source is shared across all zones.

y

• You must complete this step within 5 seconds while the selected 

zone flashes in the front panel display. Otherwise, the currently 
selected zone mode is automatically canceled. In this case, press 
ZONE CONTROLS on the front panel again.

• When a video monitor is connected to one of the ZONE VIDEO 

jacks, you can display the control information of Zone 2 or 
Zone 3 and XM Satellite Radio information on the video 
monitor screen. Set “Zone OSD” to “Zone2&Zone3” or 
“Zone2” (see page 112).

■

y

Press MUTE on the remote control to mute the sound output to 
the selected zone.

When you use the external amplifiers in Zone 2 or Zone 3, 
VOLUME +/– can be used only when “Zone2 Volume” or 
“Zone3 Volume” is set to “Variable” in “Zone2 Set” or “Zone3 
Set” (see page 113).

■

■

y

You can also adjust the tonal quality of Zone 2 or Zone 3 by using 
TONE CONTROL on the front panel. For details, see “Adjusting 
the tonal quality” on page 52.

Check that “ZONE 2” or “ZONE 3” is displayed in the display 
window of the remote control before you adjust the tonal quality 
of the corresponding zone (see page 132).