Yamaha RX-V563 User Guide

Use the VIDEO AUX jacks on the front panel to connect a 
game console or a video camera to this unit.

• To reproduce the source signals input at these jacks, select 

“V-AUX” as the input source.

• When audio signals are input at the AUDIO jacks, PORTABLE 

jack and the DOCK terminal on the rear panel, the priority order 
of the input signal is as follows:
1. DOCK
2. PORTABLE
3. AUDIO

Both FM and AM indoor antennas are supplied with this 
unit. Connect each antenna correctly to the designated 
terminals. In general, these antennas should provide 
sufficient signal strength.

y

See page 22 for connection information of the supplied AM loop 
antenna.

• The AM loop antenna should be placed away from this unit.
• The AM loop antenna should always be connected, even if an 

outdoor AM antenna is connected to this unit.

• A properly installed outdoor antenna provides clearer reception 

than an indoor one. If you experience poor reception quality, 
install an outdoor antenna. Consult the nearest authorized 
Yamaha dealer or service center about outdoor antennas.

Be sure to turn down the volume of this unit and other 
components before making connections.

l   PRESET/TUNING/CH   h

l       INPUT       h

l   PROGRAM   h

V

L

R

Audio

output

Video

output

Audio 
output

3.5 mm stereo 
mini plug

Ground (GND terminal)
For maximum safety and minimum interference, connect the 
antenna 

GND terminal to a good earth ground. A good earth 

ground is a metal stake driven into moist earth.

Outdoor AM antenna
Use a 5 to 10 m (16 to 33 
ft) vinyl-covered wire 
extended outdoors from a 
window.

01EN_RX-V563_U.book  Page 21  Thursday, January 31, 2008  10:28 AM