Yamaha RX-V563 User Guide

Press C

SYSTEM OFF on the front panel to 

set this unit to the standby mode.
Refer to the right column for details.

Press and hold N

TONE CONTROL and 

then press A

MAIN ZONE ON/OFF to turn 

on this unit.
This unit turns on, and the advanced setup menu 
appears in the front panel display.

Press O

PROGRAM l / h to select “SP 

IMP.”.
“SP IMP.” and the current speaker impedance setting 
(“8

Ω MIN”) appear in the front panel display.

Press P

STRAIGHT repeatedly to select “6Ω 

Press A

MAIN ZONE ON/OFF to save the 

The setting you made is reflected next time you turn on this unit.

■ Turning on this unit

Press A

MAIN ZONE ON/OFF (or HPOWER) 

y

When you turn on this unit, there will be a 4 to 5-second delay 
before this unit can reproduce sound.

■ Set this unit to the standby mode

Press A

MAIN ZONE ON/OFF (or 

I

STANDBY) to set this unit to the standby 

mode.
In the standby mode, this unit consumes a small amount of 
power in order to receive infrared signals from the remote 
control.

y

You can set the main zone and zone 2 to the standby mode 
simultaneously by pressing 

CSYSTEM OFF.

Caution
If you are to use 6 ohm speakers, set “SP IMP.” to 
“6

Ω MIN” as follows BEFORE using this unit.

01EN_RX-V563_U.book  Page 23  Thursday, January 31, 2008  10:28 AM