Yamaha RX-V3900 User Guide

This unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional 
operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each 
parameter) to reflect the needs of your listening environment.

• Only AMASTER ON/OFF, NSTRAIGHT and the MPROGRAM selector are effective while you are using the advanced setup 

menu.

• All the other operations cannot be made while you are using the advanced setup menu.
• The advanced setup menu is only available in the front panel display.

Press A

MASTER ON/OFF on the front 

Press and hold N

STRAIGHT and then 

press A

MASTER ON/OFF inward to the ON 

position to turn on this unit.
This unit turns on, and “ADVANCED SETUP” 
appears in the front panel display.

Rotate the M

PROGRAM selector to select 

Press N

STRAIGHT repeatedly to change 

Press A

MASTER ON/OFF to release it 

y

The settings you made are reflected next time you turn on this 
unit.

■ Speaker impedance

SPEAKER IMP.

Use this feature to set the speaker impedance of this unit 
so that it matches that of your speakers.

■ Remote sensor

REMOTE SENSOR

Use this feature to activate or deactivate the signal-
receiving capability of the remote control sensor on the 
front panel of this unit.

We recommend setting the parameter to “ON” in most cases.

■ Wake on RS-232C access

RS232C STANDBY

Use this feature to set this unit to transmit data via the RS-
232C interface when this unit is in the standby mode.

Initial setting:
[U.S.A. and Canada models]: YES
[Other models]: NO

■ Remote control ID setting

REMOTE CON AMP

Use this feature to set the remote control ID of this unit for 
remote control recognition.

Setting remote control ID
Use this feature to set the remote control ID. This feature 
is useful when you control multiple Yamaha AV receiver 
or amplifier with using the remote control.

ΩMIN

Select this setting to set the speaker impedance to 
8

Ω. The impedance of each speaker must be 8 Ω 

or higher.

6

ΩMIN

Select this setting to set the speaker impedance to 
6

Ω. The impedance of each speaker must be 6 Ω 

or higher (front speakers only: 4

Ω or higher).

Select this setting if you want to activate the 
signal-receiving capability of the remote control 
sensor.

OFF

Select this setting if you want to deactivate the 
signal-receiving capability of the remote control 
sensor.

YES

Select this setting to set this unit to transmit data 
via the RS-232C interface.

NO

Select this setting to set this unit not to transmit 
data via the RS-232C interface.

Select this setting when the ID of the remote 
control is set to “ID1”

ID2

Select this setting when the ID of the remote 
control is set to “ID2”