Yamaha yst-sw200 Owner's Manual
7
NOM REV
OUTPUT
INPUT1
INPUT2
PHASE
TO SPEAKERS
FROM AMPLIFIER
FROM AMPLIFIER
NOM REV
OUTPUT
INPUT2
PHASE
TO SPEAKERS
INPUT1
PRE OUT
Right speaker
Left speaker
Amplifier
To AC outlet
This unit
Pin plug cords
NOM REV
OUTPUT
INPUT1
INPUT2
PHASE
TO SPEAKERS
FROM AMPLIFIER
FROM AMPLIFIER
NOM REV
OUTPUT
INPUT2
PHASE
TO SPEAKERS
INPUT1
NOM REV
OUTPUT
INPUT1
INPUT2
PHASE
TO SPEAKERS
FROM AMPLIFIER
FROM AMPLIFIER
NOM REV
OUTPUT
INPUT2
PHASE
TO SPEAKERS
INPUT1
Right speaker
Left speaker
Amplifier
PRE OUT
To AC outlet
This unit
To AC outlet
This unit
Pin plug
cords
cords
CONNECTING TO LINE OUTPUT (PIN JACK) TERMINALS OF THE AMPLIFIER
•
Leave the main speakers connected to the amplifier.
•
Line output terminals may be labeled PRE OUT, REC OUT or SUBWOOFER OUT.
*
*
For PRE OUT terminal connection, the amplifier must possess at least two sets of PRE OUT terminals. With some amplifiers
with only one set of PRE OUT terminals, connection can result in no sound from the main left and right speakers. In this
case, select an alternative method of connection.
with only one set of PRE OUT terminals, connection can result in no sound from the main left and right speakers. In this
case, select an alternative method of connection.
If using one YST-SW200
If using two YST-SW200s
Notes
•
•
When connected to the REC OUT terminals, if the amplifier has a REC OUT selector, be sure to set it for the correct source. For
information on its operation, consult the amplifier’s owner’s manual.
information on its operation, consult the amplifier’s owner’s manual.
•
When connected to line output terminals of the amplifier, other speakers should not be connected to the OUTPUT terminals on
the rear panel of this unit. If connected, they will not produce sound.
the rear panel of this unit. If connected, they will not produce sound.
•
When connecting to a monaural line output terminal of the amplifier, connect to either the left or right INPUT 2 terminal.