Korg m50-73 User Guide

 This message asks you to confirm execution. 

To execute press the OK button. To cancel, press the 
Cancel button.

Calibration could not be performed 

correctly.

• Try again.

When copying or swapping an insertion 

effect or master effect, you attempted to place a 
double-size effect in IFX5 and MFX2.

• Modify your settings so that a double-size effect is 

not moved to IFX5 or MFX2, and execute again.

When you finished recording, there was not 

enough memory to open the pattern that was put into 
the track (When it must be opened automatically). If 
you press the OK button, the pattern data will be 
deleted, and the recorded or edited content will be 
saved. If you press the Cancel button, the recorded 
content will be discarded.

 Execution of the command ended normally.

 Execution of Update System Software has 

been completed successfully. Turn the power switch 
off, and then on again to complete the update. 

 When copying or bouncing, the same song, 

track or pattern was selected for both the source and 
destination. To solve this problem:

• Select a different song, track, or pattern for the 

source and destination.

 When executing the Move Measure 

command for all tracks or within the same track, the 
specified destination measure is within the source 
range. To solve this problem:

• Set a destination measure that is outside of the 

source range.

 When editing, the track or pattern that was 

specified as the destination contains no musical data. 
To solve this problem:

• Select a track or pattern that contains musical data.

The measure that was specified as the 

destination contains no data.

• Specify a destination measure that contains data.

The song that was specified as the copy 

destination or bounce destination does not exist.

• Execute the Create New Song command in the 

dialog box that appears when a new song is 
selected before copying or bouncing.

When deleting a directory, files or 

directories exist within that directory.

• Press the OK button to delete all files and/or 

directories within that directory.

When you attempted to perform a high-

level format (quick format) of media, the media had 
not been physically formatted yet. To solve this 
problem:

• Execute the Media mode Utility menu command 

 to physically format the media (full format).

An error occurred while performing a 

physical format (full format) or high-level format 
(quick format) of the media. To solve this problem:

• Use other media.

An error occurred while reading data from 

media. This error may also appear when data is being 
written to media by a Save or Copy operation. To solve 
this problem:

• Execute the reading operation once again. If the 

same error occurs, it is possible that the data on the 
media has been damaged.

A verification error occurred while writing 

data to a medium. To solve this problem:

• It is possible that the media has been physically 

damaged. Try another media. Avoid using the 
media that produced the error.