Zebra kr203 User Guide
Accessories
Printer Power Supply – 808099-004
Printer Power Supply – 808099-004
58
P1028247-001 Rev. B
KR203 Hardware Integrator Guide
10/26/2010
3.
With the power supply on and connected to the printer, the printer’s power status
indicator will light up green. The printer will begin the printer initialization process. The
printer will test the cutter and check for the presence media. The status indicator will
be green if media is loaded and flashing red (single blink) if media is not loaded.
indicator will light up green. The printer will begin the printer initialization process. The
printer will test the cutter and check for the presence media. The status indicator will
be green if media is loaded and flashing red (single blink) if media is not loaded.
Note • Ensure the appropriate power cord with a three (3) prong plug and an IEC 60320-
C13 connector are used at all times. These power cords must bear the relevant
certification mark of the country in which the product is being used.
C13 connector are used at all times. These power cords must bear the relevant
certification mark of the country in which the product is being used.
Printer Power
Connector
Connector
Plug Varies
by Country
Active Power Light
AC
Power
Cord
Power
Cord
Printer
Optional Power Supply
Accessory
IEC 60320 C-13 Plug