Jet 756151 wh-45t - 45" english wheel User Guide
7
Introduction
This manual is provided by Walter Meier (Manufacturing), Inc., covering the safe operation and
maintenance procedures for a JET Model JWS-35X Series Shaper. This manual contains instructions on
installation, safety precautions, general operating procedures, maintenance instructions and parts
breakdown. This machine has been designed and constructed to provide years of trouble free operation if
used in accordance with instructions set forth in this manual. If there are any questions or comments,
please contact either your local supplier or Walter Meier. Walter Meier can also be reached at our web
site: www.waltermeier.com.
maintenance procedures for a JET Model JWS-35X Series Shaper. This manual contains instructions on
installation, safety precautions, general operating procedures, maintenance instructions and parts
breakdown. This machine has been designed and constructed to provide years of trouble free operation if
used in accordance with instructions set forth in this manual. If there are any questions or comments,
please contact either your local supplier or Walter Meier. Walter Meier can also be reached at our web
site: www.waltermeier.com.
Specifications
Model Number
Stock Number
JWS-35X3-1 ............................................................................................................................................. 708323
JWS-35X5-1 ............................................................................................................................................. 708326
Motor ............................................................................................................................................... Stock Number
3HP, 230V, 60Hz, 1 Phase ....................................................................................................................... 708323
5HP, 230V, 60Hz, 1 Phase ....................................................................................................................... 708326
Table Size (L x W) ........................................................................................................................ 32-1/4" x 26-3/4"
Table T-slot ....................................................................................................................................... 3/4"W x 3/8”D
Table Height from Floor ..................................................................................................................................... 34”
Spindle Size (Standard) ...................................................................................................... 1-1/4" Interchangeable
Router Bit Collet Size (Optional) ...............................................................................................................1/4", 1/2"
Spindle Capacity Under Nut .............................................................................................. 1-1/4" Spindle – 4-3/32"
Spindle Travel ...................................................................................................................................................... 4"
Spindle Speeds (RPM) ................................................................................... 4000, 6000, 8000, 10000, reversing
Table Opening Diameter ............................................................................................................................ 6-19/64"
Insert Opening Diameters .............................................................................................................. 2-9/16", 4-5/16"
Fence Size x 2 ......................................................................................................................... 4-7/8" (H) x 16" (W)
Dust Collection Minimum CFM Required 4" Port .............................................................................................. 600
Overall Dimensions ..................................................................................... 32-1/4" (L) x 28-1/4" (W) x 42-3/8" (H)
Weight ................................................................................................................. 550 lbs (Shipping), 475 lbs (Net)
JWS-35X5-1 ............................................................................................................................................. 708326
Motor ............................................................................................................................................... Stock Number
3HP, 230V, 60Hz, 1 Phase ....................................................................................................................... 708323
5HP, 230V, 60Hz, 1 Phase ....................................................................................................................... 708326
Table Size (L x W) ........................................................................................................................ 32-1/4" x 26-3/4"
Table T-slot ....................................................................................................................................... 3/4"W x 3/8”D
Table Height from Floor ..................................................................................................................................... 34”
Spindle Size (Standard) ...................................................................................................... 1-1/4" Interchangeable
Router Bit Collet Size (Optional) ...............................................................................................................1/4", 1/2"
Spindle Capacity Under Nut .............................................................................................. 1-1/4" Spindle – 4-3/32"
Spindle Travel ...................................................................................................................................................... 4"
Spindle Speeds (RPM) ................................................................................... 4000, 6000, 8000, 10000, reversing
Table Opening Diameter ............................................................................................................................ 6-19/64"
Insert Opening Diameters .............................................................................................................. 2-9/16", 4-5/16"
Fence Size x 2 ......................................................................................................................... 4-7/8" (H) x 16" (W)
Dust Collection Minimum CFM Required 4" Port .............................................................................................. 600
Overall Dimensions ..................................................................................... 32-1/4" (L) x 28-1/4" (W) x 42-3/8" (H)
Weight ................................................................................................................. 550 lbs (Shipping), 475 lbs (Net)
Optional Accessories
708373
1/4" Router Collet
708374
1/2" Router Collet
708380 1/2"
Spindle
708317 3/4"
Spindle
708314
1" Spindle
708328
1-1/4" Spindle
708372 30mm
Spindle
The above specifications were current at the
time this manual was published, but because of
our policy of continuous improvement, Walter
Meier reserves the right to change specifications
at any time and without prior notice, without
incurring obligations.
time this manual was published, but because of
our policy of continuous improvement, Walter
Meier reserves the right to change specifications
at any time and without prior notice, without
incurring obligations.
Unpacking
1. Remove box and wood crating completely
from around shaper. Check for shipping
damage. Report any damage immediately to
your distributor and shipping agent. Do not
discard any shipping material until the
Shaper is assembled and running properly.
damage. Report any damage immediately to
your distributor and shipping agent. Do not
discard any shipping material until the
Shaper is assembled and running properly.
2. Unbolt the shaper from the skid.
3. Carefully slide the shaper from the pallet
onto the floor.
The Shaper should be placed in an area
with a sturdy level floor, good ventilation and
sufficient lighting. Leave enough space
around the machine for mounting extension
wings and rail assemblies, and loading and
off-loading stock and general maintenance
work.
with a sturdy level floor, good ventilation and
sufficient lighting. Leave enough space
around the machine for mounting extension
wings and rail assemblies, and loading and
off-loading stock and general maintenance
work.