OKI MC860 MFP User Manual

Operation > 80

1

Others 
(cont.)

FPolling

OFF, ON

To turn ON, use the numeric keypad to enter 
the sub-address of the remote machine.
If required, use the numeric keypad to enter 
the password of the remote machine.

F-Code Tx

OFF, ON

F Code transmission is a function to 
communicate using sub addresses or 
passwords in accordance with the standard 
of ITU-T. by creating and registering F Code 
boxes you can execute confidential 
communication and notice board 
communication. 
Use the numeric keypad to enter the sub-
address.
If required, use the numeric keypad to enter 
the password of the remote machine.
Note: up to 20 F code boxes can be 
registered, Up to 30 documents can be 
stored in one box.
Note: Polling and FPolling must be OFF.

Memory Tx

OFF, ON

Select OFF to enable real time transmission, 
i.e. fax transmission synchronization with 
scanning.

Dialling 
Options

Use the numeric keypad to enter the fax 
number. Allows you to add a prefix, pause, 
tone, etc., for example if you are dialling an 
“extension” number, add a pause between 
destination number and the extension 
number.
Press the Regist button to assign a fax 
number to the speed dial list.

Auto Rx

OFF, ON

Your MFP is set to receive faxes 
automatically, if you wish to change this to 
manual receive select OFF.

Logout

If access control is enabled, logout once you 
are finished to avoid any unauthorized 
access.