Garmin 5008 Owner's Manual
GPSMAP 5000 Series Owner’s Manual
V
IeWInG
I
nformatIon
V
Ie
WI
n
G
I
nforma
tIon
Viewing Gauges
Use the Gauges screen to view engine gauges in an analog or digital format.
NOTE: You must be connected to a NMEA (National Marine Electronics Association) 2000
network capable of sensing engine data to view the gauges.
To select an analog or digital screen:
1. To view the Gauges from the Home screen, touch
Information
>
Gauges
.
2. To select an analog or digital screen, touch
Menu
from the Gauges screen.
Touch
Gauge Setup
to select the number of engines (1 - 4), number of fuel tanks (1 or 2), and to
reset the odometer to zero.
NOTE: For more than two engines, you can only use the digital gauges. For one or two engines,
you can switch between analog and digital gauges.
Viewing Video
Your unit can display video if you are connected to a video source (or sources) using the supplied
video cable. See the 4000/5000 Series Installation Instructions for details.
To view video from the Home screen, touch
To view video from the Home screen, touch
Information
>
Video
.
Touch
Menu
to setup the following:
Source—selects the video device (Video 1 or Video 2) that displays the video. If you have two
video sources and wish to alternate between the two, touch
Alternate
to define the amount of
time each video screen appears.
Aspect—selects a standard video or one that is stretched to fit the screen.
Aspect—selects a standard video or one that is stretched to fit the screen.
NOTE: The video image can not be stretched to dimensions larger than what are provided by the
video device, so it may not fill the entire screen of the 5012 or 5212 units.
Brightness—adjusts the brightness up or down. Select
Auto
to allow the unit to automatically
adjust the brightness.
Saturation—adjusts the color saturation up or down. Select
Saturation—adjusts the color saturation up or down. Select
Auto
to allow the unit to
automatically adjust the saturation.
Contrast—
Contrast—
adjusts the contrast up or down. Select
Auto
to allow the unit to automatically
adjust the contrast.
Standard—selects the video format used by the source (PAL or NTSC). Touch
Standard—selects the video format used by the source (PAL or NTSC). Touch
Auto
to let the
unit automatically select the source format.
•
•
•
•
•
•